1000 TR PD

The FALK 1000 TR PD is a robust panel with a high-insulating PRI foam core and hollow controlled joint system ideal for low slope roofs.
DOWNLOAD PDF

Product Detail

The FALK 1000 TR PD is a robust panel with a high-insulating PIR foam core and hollow controlled joints designed for low slope roof designs. Due to the 5 wide trapezoidal crowns this product is suitable for large spans and has excellent insulation properties. This product is supplied with a double sealant, both at the inside and outside. Heat loss and condensation problems will be a thing of the past.

Features

  • Below 4 degrees roof pitch
  • Optimum (double) sealing
  • Hollow controlled joint system
  • For new builds and renovations
  • Negative stacking, quick installation
  • Supplied standard with foam seal at joints
  • Coating guarantee up to 30 years
  • Optional alternative steel thicknesses and coatings available

Properties

Core Thickness
(mm)
R-VALUE*
(h.ft².°F/BTU)
U-VALUE (SI)*
[W/(m².K)]
100 mm / 3.94 in 30.66 0.185
125 mm / 4.92 in 37.70 0.151
150 mm / 5.91 in 44.73 0.127

*Tested at 4°C / 40°F mean temperature.

Configuration

Cover Width1000 mm / 39.4 in
C.t.c. Crowns200 mm / 7.9 in
Profile Height35 mm / 1.38 in
Core Thickness100, 125 and 150 mm
Minimum Roof SlopeLess than 1:12 or 4°
Core MaterialPolyisocyanurate insulation
EndlapAvailable with or without endlap
Direction of LayAvailable left and right
Coatings

External: Colorcoat Prisma or Colorcoat HPS200 ULTRA®
Internal: Polyester

ColoursAccording to our colour charts See: falkpanels.ca/charts
Minimum Length2500 mm / 8’-2”, shorter lengths available on request
Maximum Length11938 mm / 39’ - 2”