Product Detail
The FALK 1000 TR + is a robust panel with a high-insulating PRI foam core and hollow controlled joints. Due to the 5 wide trapezoidal crowns this product is suitable for large spans and has excellent insulation properties. This product is supplied with a double sealant, both at the inside and outside. Heat loss and condensation problems will be a thing of the past.
Features
- From 4 degrees roof pitch
- Optimum (double) sealing
- Positive stacking, quick installation
- Hollow controlled joint system
- Coating guarantee up to 30 years
- Supplied standard with foam seal at joints
- Optional alternative steel thicknesses and coatings available
Properties
| Core Thickness (mm) |
R-VALUE* (h.ft².°F/BTU) |
U-VALUE (SI)* [W/(m².K)] |
|---|---|---|
| 100mm | 30.66 | 0.19 |
| 125mm | 37.70 | 0.16 |
| 150mm | 44.73 | 0.13 |
*Tested at 4°C / 40°F mean temperature.
Configuration
| Cover Width | 1000 mm / 39.4 in |
| C.t.c. Crowns | 200 mm / 7.9 in |
| Profile Height | 35 mm / 1.4 in |
| Core Thickness | 100, 125 and 150 mm |
| Minimum Roof Slope | 1:12 or 4° |
| Core Material | Polyisocyanurate insulation |
| Endlap | Available with or without endlap |
| Direction of Lay | Avaliable left and right |
| Coatings | External: Colorcoat Prisma or Colorcoat HPS200 ULTRA® |
| Colours | According to our colour charts See: falkpanels.ca/charts |
| Minimum Length | 2500 mm / 8’-2”, shorter lengths available on request |
| Maximum Length | 11938 mm / 39’ - 2” |